JQDN

General

Cas Vs Ras! Or Is Cl30-40-40-96 Faster Then Cl32-38-38-96?

Di: Stella

I checked the latency already Only difference would be the sub timings, i assume the 6400 is a little bit faster with the small subtiming increase CL32 6400 vs CL36 6000 is quite a hefty difference in RAM performance. BUT it does not really translate that well into an actual performance, I certainly would not pay that 200eur difference for that. What To Know CL stands for “CAS Latency,” and it refers to the number of clock cycles it takes for the RAM to respond to a read or write request. However, if you’re on a budget, then DDR5 RAM CL36 is a good option that still offers good performance. While DDR5 RAM CL30 offers a slight edge in terms of speed, DDR5 RAM CL36 is a more affordable option that

DDR5 Are all timings important?

Corsair CMP64GX5M2X6600C32 Dominator Titanium RGB 64GB (2x32GB) DDR5 ...

Brand: G.Skill, Series: Trident Z5 RGB, Model: F5-6000J3040F16GA2-TZ5RS 32GB kit containing 2 x 16GB modules, DDR5-6000, 288-Pin, CAS Latency CL30 (30-40-40-96) at 1.35V (intel XMP) ECC: No, Dual Channel Kit, Recommended Use: High Performance or Gaming Memory Memory kits will boot at the SPD speed at default BIOS settings with compatible To illustrate the real-world impact of DDR5 RAM MHz vs CL, let’s compare two hypothetical systems: System A: Equipped with DDR5-6000 CL36 RAM System B: Equipped with DDR5-5200 CL30 RAM In general, System A will exhibit faster raw speeds due to its higher MHz value, resulting in quicker loading times and smoother multitasking.

So I have both kits and have a 7800X3D. Which kit will give better real world performance? I’m told the 6000 will since it’s lower latency and it will run in 1:1 mode, but then I’ve read that CL32 6400 will outperform it. Anyone know for sure?

the lower the timings, the faster the response in a lot of scenarios. many gaming benchmarks and reviews have mentioned even with lower speed RAM, and the same sized modules, that they notice a decent uptick in available FPS using CL 30 vs CL 36. overall, the lower the timing the better. Hey everyone, so I’m planning to make a build with a 7900xtx and a 7800x3d. According to my search, the best RAM for this setup would be 6000Mhz CL30 ddr5. However, I found a pretty good deal, the same RAM with a bit more latency CL32. The cost between the two is around 35%, so I’m wondering, whether it’s worth the extra cost for the small performance gain.

G.SKILL Ripjaws M5 RGB Series (Intel XMP 3.0) DDR5 RAM 32GB (2x16GB) 6000MT/s CL32-38-38-96 1.35V Desktop Computer Memory UDIMM – Matte Black (F5-6000J3238F16GX2-RM5RK) Brand: G.Skill, Series: RipJaws S5, Model: F5-6000J3238G32GX2-RS5K 64GB kit containing 2 x 32GB modules, DDR5-6000, 288-Pin, CAS Latency CL32 (32-38-38-96) at 1.40V (Intel XMP) ECC: No, Dual Channel Kit, Recommended Use: High Performance or Gaming Memory Memory 36 36 36 96 kits will boot at the SPD speed at default BIOS settings with compatible hardware. Another person said that I need to change my trf1 setting, but you can’t change that on AMD motherboards. Mine is a 6000mhz gskill 2×16 kit hynix a die, CL 30-38-38-38-96. I’ve got the rog strix e gaming wifi x670e motherboard on the 7950x3d cpu. Any help here would be greatly appreciated. Hello bump on this, any help can be provided?

别只看频率，时序同样重要，七彩虹战斧赤焰DDR5内存实测

One with CL36 – 36-36-36-96 timings One with CL30 – 30-38-38-96 timings Both are the same memory speed, but the timings are different. I’m wondering which kit would generally result in better performance? The reason I ask is I often see people talk about lower timings DDR5 6000 PC5 48000 being better, but I also hear about tight timings being better. Liebe Community, ich versuche aktuell, die Kaufempfehlung zum RAM aus dem Thread „Der ideale Gaming-PC“ zu verstehen: Patriot Viper VENOM DIMM Kit 32GB, DDR5-6000, CL36-36-36-76 wurde in der Range

  • Does RAM speed really matter?
  • メモリはどう選べばいいのか ～中級編～
  • DDR5-6200 c40 vs 6000 c30: A Quick Take On Timings

truePlanning on building a computer but need some advice? This is the place to ask! /r/buildapc is a community-driven subreddit dedicated to custom PC assembly. Anyone is welcome to seek the input of our helpful community as they piece together their desktop. 相比起DDR5内存上市初期只有DDR5-4800 CL40的时序，今年性能级DDR5内存的频率提升，时序也在不断下降，基本上6000MHz频率已经做到CL32、CL30时序了。

When buying DRAM, you’ll see information about their timings, like 34-42-42-96 or 40-40-40-77. Those numbers represent the DRAM kit’s latency, and these settings are stored on a chip on the memory sticks called the SPD (Serial Presence Detect), so you may see those letters at the same time. The first number is often the only one mentioned as “C” or “CL” or Anyone have enough experience with ddr5 or know about if lower of 40 to CL’s are worth the premium price over higher CL and similar MHz speeds for real world About this item G.SKILL Flare X5 Series DDR5 U-DIMM Memory Kit, Model: F5-6000J3040G32GX2-FX5 64GB total capacity kit containing 2x32GB modules, rated for up to DDR5-6000 CL30-40-40-96 at 1.40V Non-ECC, DDR5 U-DIMM, 288-pin, for Desktop PC & Gaming Includes JEDEC default profile, and AMD EXPO memory overclock profile Do not mix

Looking for RAM for 13700k both of these options are currently the same price currently CORSAIR DDR5 6000 CL30 – 6400 CL32 CMK32GX5M2B6000C30 vs CMK32GX5M2B6400C32 Does anyone have any opinions on what I should go for, mainly for gaming, Is the lower latency better or speed better. Thanks much. G.Skill has embedded one EXPO profile into the Trident Z5 Neo RGB. Once enabled, the memory jumps to DDR5-6000 with timings and DRAM voltage fixed at 30-38-38-96 and 1.35V, respectively.

作一把，试试 Zen4 7950x 对于 DDR5-6400 CL32-38-38-90 支持如何 - 电脑讨论(新) - Chiphell ...

I see that a lot of people recommend DDR5-6000 at CL30. For CL30, I can’t find anything at 16GB, lowest is 32, so it’s a significant premium over CL36. My question is: how big a deal is CL30 over CL36? Is a 32GB DDR5 6000 mhz CL30 worth $70ish more than a 16GB DDR5 6000 mhz CL36? That’s the price difference I’m looking at.

GSKILL TRIDENT Z5 DDR5 RGB 6000MHz EXPO 32GB (2x16GB) CL30 —– 30 38 38 96 —- $326.7 : GSKILL TRIDENT Z5 DDR5 RGB 6000MHz EXPO 32GB (2x16GB) CL32 —– 32 38 38 96 — $297 : G.SKILL FLARE X5 32GB (2X16GB) EXPO DDR5 6000MHz F5-6000J3636F16GX2 —— 36 36 36 96 — $219.45 ^none have on die ecc Should i just buy the With actual timings of 30-38-38-96, how much faster is G.Skill’s DDR5-6000 than Patriot’s previously-tested Viper 6200? When buying DRAM, you’ll see information about their timings, like 34-42-42-96 or 40-40-40-77. Those numbers represent the DRAM kit’s latency, and these settings are stored on a chip on the memory sticks called the SPD (Serial Presence Detect), so you may see those letters at the same time. The first number is often the only one mentioned as “C” or “CL” or

Ich habe mir das G.SKILL Trident Z5 NEO RGB Series 64 GB (2×32 GB) DDR5‑6000 CL32‑38‑38‑96 1,40 V Dual‑Channel Kit (Mattschwarz) geholt – und bin restlos begeistert: ? Performance & Stabilität: – Läuft sofort im AMD EXPO‑Profil bei vollen 6000 MT/s mit CL32 – spürbar schneller im Alltag als DDR4 oder langsamere DDR5‑Kits – In Benchmarks wie Piecing a PC build together and instead of being happy with the parts I obviously have to see some RAM that has better looking RGB and now I want it because I am a little bitch. Originally had G.Skill 2x16gb CL32 picked out but now I want Corsair Vengeance 2x16gb CL38. Just curious if there is any significant reason I should go with the G.Skill. I did a little google

G.SKILL Flare X5 Series 32GB (2 x 16GB) 288pin SDRAM DDR5 6000 (PC5-48000) CL32-38-38-96 1, 35V Dual Channel Desktop Memory Modell F5-6000J3238F16GX2 -FX5 (Mattschwarz) – Kostenloser Versand ab 29€. Jetzt bei Amazon.de bestellen!

What is the difference between G.Skill Trident Z5 DDR5-5600 CL30 64GB (2x32GB) and G.Skill Trident Z5 Neo AMD DDR5-6000 CL32 32GB (2x16GB)? Find out which is better and their overall performance in the memory ranking. worth it to go Does going from a CAS latency of 40 to 30 make any noticeable difference on gaming performance? My RAM in my system is DDR5 6000 CL40, would there be any noticeable difference going with DDR5 6000 CL 30?

Would it be worth it to go with the CL32 kit if it were only 5$ more then the 36 kit? Is there any real gain in performance? (I do know the timings on DDR5 don’t really matter that much just curious) Archived post. New comments cannot be posted and votes cannot be cast. I would like to get 64Gb in 2×32 GB and these are the 2 options I get from the G.Skill Trident Z5 Neo RGB. From what I read 30-38-38-96 is the ideal combo so I think 30-40-40-96 would be better, correct? Edit: DDR5-6000

Naturally the cl32 kit attracts my eye (only the first number is lower though), but the higher voltage number is a bit alarming. Maybe the cl36’s got better OC headroom?